Shopping cart

Your basket is empty.

Sales: 0330 445 0000

SureVoIP Number Search

(
)
Our instant setup tool allows you to select your own telephone number for no extra cost. Note: memorable numbers cost more than the standard monthly of each product and are clearly marked.

Snom PA1

Snom PA1
£150.00

Snom PA1

SKU: Snom-PA1
    

The snom PA1 is a new audio device, which can be used as an extension of any public address system, allowing you to connect a loud speaker or PA amplifier up as an extension to a VoIP system. Ideal for broadcasting announcements or playing music, either through connecting to external speakers or a headphone connection.

The snom PA1 can be installed to walls and ceilings and uses the familiar snom hardware and firmware - so you know it is of the highest quality. It can be powered by PoE or a 5v power supply.

The announcement is generated by making a call from a snom telephone. The PA1 also has its own private number in the same way that all devices connected to a SIP system do.

Features

  • Can be powered by a 5v power supply or via the network using PoE (IEEE 802.3af)
  • Ethernet: 2 x IEEE 802.3, 10/100 Mbps switch
  • SIP communication and Multicast
  • Central configuration and maintenance
  • Web interface menu
  • Remote volume configuration
  • 4 Watt power amplifier, class D (loudspeaker not included)
  • Key for announcement of IP address and for resetting
  • 2 LED status indicators
  • Two 3.5mm jack sockets for connecting a microphone and low power (e.g. headset) speaker.
  • 4 freely programmable output pins, configuration via web interface
  • Robust housing for wall-mount
  • 2 Year Manufacturers Warranty

snom PA1 Main Uses

  • Public Address System: Connect a 4W speaker or an amplifier system to the PA-1 audio output. Register the PA-1 as an extension on your SIP system in the same way you would any other snom phone. When you call the PA-1 it auto-answers the call and passes either one way or two way audio (if a microphone is also connected).
  • Door Entry System: Using a special firmware version, the PA-1 can be configured as a SIP door entry system. Connect a 'door bell' push button, external microphone, external speaker then register the PA-1 as an extension to your SIP system in the same way as any other Snom phone. The PA-1 will then place a call to your SIP system so that you can speak to whoever is at the door (even if you aren't in the building). The PA-1 also has four DTMF controlled switched outputs which can be connected to an electronic door lock, outside light or perhaps to activate an IP camera recording.

The PA1 is not limited to these two uses, it can be used to "SIP enable" any device which has normal audio inputs and outputs. With suitable relays connected to to switched outputs it could also form the basis of a home automation system controlled via your SIP phone system.