Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
howtos:setup:cisco [2019/09/10 10:47]
sfalconer [Configuration]
howtos:setup:cisco [2019/09/10 10:48] (current)
sfalconer [Configuration]
Line 30: Line 30:
     * Under **General** set **Line Enable** to **yes**     * Under **General** set **Line Enable** to **yes**
     * Under **NAT Settings** set **NAT Mapping** and **NAT Keep Alive** to **yes**     * Under **NAT Settings** set **NAT Mapping** and **NAT Keep Alive** to **yes**
-    * Under **SIP Settings** set **SIP Transport** to **UDP** {{ :​howtos:​setup:​screenshot_from_2019-09-10_10-01-19.png?​nolink&​1000 |}}+    * Under **SIP Settings** set **SIP Transport** to **UDP** {{ :​howtos:​setup:​screenshot_from_2019-09-10_10-01-19.png?​nolink&​1200 |}}
     * Under **Proxy and Registration** enter the following settings. You will need to reference your welcome pack.     * Under **Proxy and Registration** enter the following settings. You will need to reference your welcome pack.
       * Set **Proxy** to the //SIP Proxy/​Registrar Server// provided in your welcome email       * Set **Proxy** to the //SIP Proxy/​Registrar Server// provided in your welcome email
Line 38: Line 38:
       * Put your //SIP Username (extension number)// into the **User ID** and **Auth ID** fields. This is provided in your welcome pack.       * Put your //SIP Username (extension number)// into the **User ID** and **Auth ID** fields. This is provided in your welcome pack.
       * Put your provided //SIP password (also referred to as SIP Secret)// into the **Password** field. This is provided in your welcome pack.       * Put your provided //SIP password (also referred to as SIP Secret)// into the **Password** field. This is provided in your welcome pack.
-      * Set **Use Auth ID** to **yes**{{ :​howtos:​setup:​screenshot_from_2019-09-10_10-00-30.png?​nolink&​1000|}}+      * Set **Use Auth ID** to **yes**{{ :​howtos:​setup:​screenshot_from_2019-09-10_10-00-30.png?​nolink&​1200|}}
     * Under **Audio Configuration** set **Preferred Codec** to **G711a** or set to **G722** if on SureVoIP Multi-User Hosted.     * Under **Audio Configuration** set **Preferred Codec** to **G711a** or set to **G722** if on SureVoIP Multi-User Hosted.
     * Put the following into **Dial Plan**\\ <​code>​([1234]xxx|0[1-9]xxxxxxxxxS0|0[1-9]xxxxxxxx|*09x|*9[78]S0|**[1234]xxxS0|*99[1234]xxxS0|999S0|112|101|111|116xxx|00xxx.|xxxxxxx.)</​code>​     * Put the following into **Dial Plan**\\ <​code>​([1234]xxx|0[1-9]xxxxxxxxxS0|0[1-9]xxxxxxxx|*09x|*9[78]S0|**[1234]xxxS0|*99[1234]xxxS0|999S0|112|101|111|116xxx|00xxx.|xxxxxxx.)</​code>​